Garuda3d ‘G3d L1’ Desktop 3d printer is a made will all metal parts. It also features special aluminum V-slot frame. It has 200 x 200 x 200mm build volume, with standard 0.4mm nozzle diameter (can be replaced to 0.2mm / 0.3mm).
This is as an assembled and tested 3d printer.
|Print technology||FFF (FDM)|
|Connectivity||USB, SD card|
|Hot end||All metal hot end|
|Filament material||1.75mm PLA, PLA+, Flexible – upto 245⁰C|
|Nozzle diameter||0.4mm (Interchangeable)|
|Nozzle material||Brass (Upgradable to hardened steel)|
|Print speed||Up to 90mm/s|
|XYZ Accuracy||12.5, 12.5, 5 microns|
|Model file type||.stl, .obj|
|Print file type||.gcode|
|Heating bed||No. (You can upgrade with a Heated bed)|
|Build plate leveling||Manual. (You can upgrade with a Auto bed leveling sensor)|
|Electronics||8 Bit 16Mhz|
|Stepper drivers||16microstepping A4988|
Terms & Conditions:
|1.||Warranty||3 months of Replacement warranty will be provided on the parts. (Except Nozzle).
Once the DIY parts are received by the customer, he/she has to check the parts for its damage or its functioning. In case of any damage / part failure, he/ she has to inform within 4 days of delivery of the parts.
Replacements would be shipped free of cost and instructions to fix the replacement would be given. Replacement will be send through Speed post only. If in case of any delay in delivery, Garuda3d are not responsible.
After 4 days, no replacement will be made free of cost. The customer has to buy any parts as a spare part only.
|2.||Assembly||Soft copy of Assembly instructions will be send to the customer. Also, troubleshooting videos will also be sent.|
|3.||Support||Online support will be provided via Skype, Team viewer, Watsapp, e-mail etc. for a period of 1 month. We will try to solve your queries within 8-12 working hrs.|
|4.||Shipment||Shipment will be send through India post Registered Post only. It will take minimum of 4-5 working days based on the location.|
- Assembled 3d printer as shown in the image.
- Spiral sleeve included.
- Allen keys – 1.5mm, 2mm, 2.5mm , 2.5mm
- Glass plate – 01 nos
Note : SD card & Heat bed not included. These can be bought separately.
For any queries, please Watsapp : 8297118877
Please find the quality of the prints in the below link :
If you are satisfied with the product, we kindly request you to give a good feedback.
If you have any issues, please don’t raise the claim. Please contact us. We will solve all of your queries.
Note : Also, allow us 5-6 working days for dispatching.
Thanks for purchasing.