Thunder Pro V3.0 | Fully Enclosed 3D Printer

Main Features

Detailed Specification of Thunder Pro V3

Printer Properties
Print technology	FFF (Fused Filament Fabrication)
Build volume	300x300x300mm
Extruders	Single Extruder
Nozzle diameter	0.4mm (Interchangeable from 0.4mm to 1.2mm)
Print resume on power outage	No (Recommended to connect with Inverter)
Filament run out / Jam Detection	Yes
Build plate leveling	Automatic with Bed leveling sensor
Display Control Panel	Supplied with Full Touch 5” HDMI Screen
Print Speed	Up to 200mm/s * (Various speeds with various nozzle sizes)
Mechanics – XY	Higher quality Linear Guides
Mechanics – Z	Dual Ball screws
Enclosure	Full metal body enclosure
Camera Monitoring	LAN based camera monitoring and control
Firmware	Klipper
Filter System	HEPA with activated carbon

Printing Properties
Operating Temperature	Upto 40⁰C
Nozzle temperature	300⁰C
Heating bed	Aero grade 8mm thick 7075 T6 Aluminum with Faster AC Silicon head bed AC up to 110deg
Build plate	Glass Plate / Spring Steel PEI Magnetic Build Plate
Filament Diameter	1.75mm
Supported Filaments	PLA, ABS, PETG, Nylon,TPU, Carbon Fiber and other Composite Materials* (* – requires hardened steel nozzle.)
Filament Support	Open filament from any branded company.
Supported File types	.STL, .OBJ, .AMF
Supported OS	Windows, MacOS, Linux
File transfer and Connectivity	USB, SD-Card
Slicing software	Cura
Printer control Software	Klipper Main Sail
Input	240V AC, 50Hz
Power Rating	From 100 watts up to 600 watts