In DP-300, DP stands for "Design and Provisioning" in the context:
The machine can be tailored according to customer needs:
| Feature | Specification |
|---|---|
| Print Technology | FFF (Fused Filament Fabrication) |
| Build Volume | 300x300x300mm – Single Mode (Either Left or Right Extruder Separately) 100x300x300mm – Duplicate and Mirror Modes |
| Extruders | Independent Dual Extruder |
| Nozzle Diameter | 0.4mm (Interchangeable from 0.4mm to 1.2mm) |
| Print Resume on Power Outage | No (Recommended to connect with Inverter) |
| Filament Run Out / Jam Detection | Yes |
| Build Plate Leveling | Automatic with Bed Leveling Sensor |
| Display Control Panel | Supplied with Full Touch 5” HDMI Screen |
| Print Speed | Up to 150mm/s * (Various speeds with various nozzle sizes) |
| Mechanics – XY | Higher Quality Linear Guides |
| Mechanics – Z | Dual Ball Screws |
| Enclosure | Full Metal Body Enclosure |
| Camera Monitoring | LAN-Based Camera Monitoring and Control |
| Firmware | Klipper |
| Filter System | HEPA with Activated Carbon |
| Feature | Specification |
|---|---|
| Operating Temperature | Up to 40⁰C |
| Nozzle Temperature | 300⁰C |
| Heating Bed | Aero Grade 8mm Thick 7075 T6 Aluminum with Faster AC Silicon Heat Bed up to 110⁰C |
| Build Plate | Glass Plate / Spring Steel PEI Magnetic Build Plate |
| Filament Diameter | 1.75mm |
| Supported Filaments | PLA, ABS, PETG, Nylon, TPU, Carbon Fiber, and Other Composite Materials* (* Requires Hardened Steel Nozzle) |
| Filament Support | Open Filament from Any Branded Company |
| Supported File Types | .STL, .OBJ, .AMF |
| Supported OS | Windows, MacOS, Linux |
| File Transfer and Connectivity | USB, SD-Card |
| Slicing Software | Cura |
| Printer Control Software | Klipper Main Sail |
| Input | 240V AC, 50Hz |
| Power Rating | From 100 Watts up to 600 Watts |
